Last Updated: November 17, 2026
Quick Summary
The best lightweight rifle stock for mountain hunting depends on your action and budget: the MDT CRBN is the carbon fiber all-rounder for Remington 700 and Tikka builds, while the GRS Hunter Light is the lightest on paper at 1.05 kg. The GRS Fenris is the budget entry point at $650 and 1.4 kg.
- The five stocks range from the $650 GRS Fenris to the $2,159.99 MDT HNT26.
- The GRS Hunter Light is listed at 1.05 kg and recommends glass bedding.
- The MDT CRBN models here are right-handed only, so left-handed shooters need other options.
- The HNT26 is the only stock in this lineup covering Savage and Howa 1500 actions.
- The GRS Fenris adjusts length of pull from 33.5 cm to 36.3 cm and needs no bedding.
Table of Contents
- Quick Comparison: Five Lightweight Rifle Stocks Side by Side
- How We Rated These Lightweight Rifle Stocks
- 1. MDT CRBN Rifle Stock: The Carbon Fiber All-Rounder
- 2. MDT HNT26 Chassis System: Most Versatile Action Fit
- 3. GRS Hunter Light: Lightest and Slimmest Build
- 4. MDT CRBN in Hunter Blaze and Veil Tac Grey: Finish and Value Editions
- 5. GRS Fenris: Best Value Synthetic Rifle Stock
-
Lightweight Rifle Stocks for Remington 700 and Tikka: Compatibility Check
- Step 1: Confirm your action and generation
- Step 2: Decide handedness before anything else
- Step 3: Choose bottom metal and understand what it changes
- Step 4: Check forend and buttstock options if you shoot supported
- Step 5: Confirm whether the stock needs bedding
- Step 6: Measure length of pull and plan spacers
- Step 7: Verify caliber ceiling and barrel contour
- Quick compatibility summary
- Frequently Asked Questions
Quick Comparison: Five Lightweight Rifle Stocks Side by Side
A lightweight rifle stock is the single biggest weight saving you can make on a hunting rifle without touching the barrel or action. The five stocks below are the lightweight options in this lineup for mountain builds. Here is the short version.
| Stock | Material | Listed Weight | Price | Best For |
|---|---|---|---|---|
| MDT CRBN | Carbon fiber | Not listed | $1,749.99 | All-round mountain build |
| MDT HNT26 | Magnesium and carbon fiber | Not listed | $2,159.99 | Multi-action versatility |
| GRS Hunter Light | Composite | 1.05 kg | $971.56 | Lightest, slimmest fit |
| MDT CRBN Hunter Blaze | Foam-filled carbon fiber | Not listed | $2,149.99 | Finish and value |
| GRS Fenris | Synthetic | 1.4 kg | $650.00 | Budget entry point |
Price
How We Rated These Lightweight Rifle Stocks
For mountain hunting, real weight and behavior under recoil matter more than a published spec sheet, so this comparison uses a consistent rubric.
The four scoring categories
This comparison scores each stock out of 25 points across four equally weighted categories, because a stock that wins on weight but fails on fit is not a mountain stock.
- Verified weight and weight-saving potential (0-25): Where the manufacturer publishes a weight, it is noted, and stocks with no bare weight published are flagged.
- Mountain-hunting ergonomics (0-25): Grip style, cheekpiece adjustment, length-of-pull range and spacers, forend width for pack or tripod rests, and behavior when winded and shooting from improvised positions.
- Compatibility and fitting work (0-25): Action inlets, handedness, bottom-metal options, barrel-contour clearance, and whether the stock is drop-in or needs bedding, inletting, or gunsmithing.
- Durability and field behavior (0-25): Material construction, fastener and torque retention, how it handles a hard knock on rock, and whether folding hinges or adjustable cheekpieces need field maintenance.
How we handled weight figures
Weight is the headline for this query and the number most often misreported. The MDT CRBN and HNT26 do not have a published bare weight in the specifications available here. Where a weight is published, we note whether it is bare-stock or configured: the GRS Hunter Light is listed at 1.05 kg give or take five percent depending on inlet, and the GRS Fenris at 1.4 kg.
A CRBN ordered with Hunting Bottom Metal is not the same object as a bare chassis, so configuration matters when comparing weights.
What we did not do
Watch out: any roundup that presents a single "best" weight without stating whether bottom metal, spacers, and recoil pad are included is giving you a number you cannot compare across brands. Ask what the figure includes before you build a spreadsheet around it.
Why this matters for mountain hunters
The gap between the lightest and heaviest stock here is roughly 350 grams. On a five-day alpine hunt that compounds with every step, but lighter stocks can transmit more recoil and demand more from the shooter's position.
1. MDT CRBN Rifle Stock: The Carbon Fiber All-Rounder
The MDT CRBN is a carbon fiber chassis for right-handed actions that suits many mountain hunters, covering both Remington 700 and Tikka T3 platforms.

Compatibility is broad: Remington 700 Short Action, Remington 700 Long Action CIP 3.850", Tikka T3/T3x Short Action, and Tikka T3/T3x Long Action. You can view the full CRBN stock details and options on our product page.
Finish options run from Black Carbon Fiber through Woodland, Hunter Blaze, Veil Tac Grey, True Timber Viper, and Rattle Can ODG.
Watch out: this model is right-handed only. Left-handed shooters need to look elsewhere in the MDT range or accept a custom inlet.
Weight, Fit and Bottom Metal Options
MDT does not publish a bare weight for the CRBN in the specifications we hold, so we will not invent one. The product listing describes carbon fiber construction as a lightweight, rigid platform.
The bottom metal decision catches people out. Three configurations exist: No Bottom Metal, Hunting Bottom Metal, and Precision Bottom Metal.
Best for: hunters who want one stock that handles both a September alpine hunt and a summer precision session. Skip if: you shoot left-handed or need a folding buttstock.
2. MDT HNT26 Chassis System: Most Versatile Action Fit
The HNT26 covers a broad range of rifle actions.
The HNT26's action breadth may suit owners of multiple rifles across different action types. You can check HNT26 action compatibility and configure yours.
Two forend choices exist: Standard and ARCA. The ARCA option is intended for shooting off a tripod. Buttstocks split into folding and non-folding; folding packs smaller and travels better, at the cost of one more mechanism to maintain.
Watch out: the magnesium base is light, but it is not indestructible.
Best for: hunters with multiple rifles or an ARCA tripod setup. Skip if: you only own one rifle and want to spend less.
3. GRS Hunter Light: Lightest and Slimmest Build
GRS lists a weight for the Hunter Light of 1.05 kg, give or take five percent depending on the weapon inlet. GRS states it is 25 percent lighter than its own Sporter model.
The design is deliberately slim: GRS scaled the grip and length of pull down by five percent, making this its shortest and slimmest offering (GRS Hunter Light). The listing describes the Hunter Light as a favorite among new hunters and alpine hunters.
Length of pull starts at 32.5 cm and extends to 34.5 cm using the two installed spacers (GRS Hunter Light). You can add up to two more spacers, sold separately, to reach 36.5 cm. You can see the Hunter Light specifications and order.
The listing recommends glass bedding this stock.
Best for: alpine hunters chasing the lowest possible carry weight. Skip if: you want a true drop-in fit with no bedding work.
4. MDT CRBN in Hunter Blaze and Veil Tac Grey: Finish and Value Editions
Two CRBN variants deserve their own mention because they solve different problems. The Tikka T3x Short Action in Hunter Blaze uses foam-filled carbon fiber, which keeps the stock light and durable while adding a finish that stands out in alpine light and heavy timber alike.
The Veil Camo Tac Grey edition for the Remington 700 Short Action is the premium build, with a magnesium micro chassis and V-block bedding for a solid action installation. You can view the Hunter Blaze edition if the finish is what sold you.
The value equation is straightforward: the Hunter Blaze edition delivers the CRBN platform with a terrain-suiting finish, while the Veil Tac Grey limited edition gives you the most rigid forend and the bedding system.
Watch out: the Veil Tac Grey model is a limited edition tied to the Remington 700 Short Action. Confirm availability before you plan a build around it.
Best for: hunters who want the CRBN platform with a specific finish or maximum forend rigidity. Skip if: you need long action compatibility from the finish-specific models.
5. GRS Fenris: Best Value Synthetic Rifle Stock
At $650, the GRS Fenris is a fully adjustable synthetic stock.
The Fenris is a synthetic stock with drop-in inletting. You can see Fenris pricing and inlet options.
Forend width is 58 mm, wider than the Hunter Light's 47 mm. Maximum caliber is .375 H&H, same as the Hunter Light.
The trade-off is weight. At 1.4 kg it is roughly 350 grams heavier than the Hunter Light.
Best for: first-time stock upgraders and range-to-field crossover rifles. Skip if: you are counting grams for a high-alpine build.
Lightweight Rifle Stocks for Remington 700 and Tikka: Compatibility Check
Compatibility is where most mountain rifle builds go wrong. Treat this as a pre-purchase checklist, not a spec recap.
Step 1: Confirm your action and generation
The inlets are not interchangeable across generations, and a "Remington 700" label hides real variation.
- Remington 700 Short Action: covered by the MDT CRBN, the CRBN Veil Tac Grey edition, and the MDT HNT26.
- Remington 700 Long Action CIP 3.850": covered by the MDT CRBN and the HNT26. This is the CIP-length inlet, not the standard long action, so confirm your magazine and cartridge length before ordering.
- Tikka T3/T3x Short Action: covered by the CRBN, the CRBN Hunter Blaze edition, and the HNT26.
- Tikka T3/T3x Long Action: covered by the CRBN and the HNT26.
- Savage short and long action, Howa 1500: covered by the HNT26 only in this lineup.
If your action is not on this list, none of these five stocks is a drop-in, and you are looking at a custom inlet or a different product. Buy the stock that fits your action first, then optimize weight.
Step 2: Decide handedness before anything else
The CRBN models listed here are right-handed only. Left-handed shooters need to look elsewhere in the MDT range or accept a custom inlet, and that decision affects which finish and bottom-metal options are available. Confirm handedness before you fall in love with a finish.
Step 3: Choose bottom metal and understand what it changes
The MDT CRBN can be ordered with No Bottom Metal, Precision Bottom Metal, or Hunting Bottom Metal, and this choice shifts both your final build weight and your magazine strategy.
- No Bottom Metal: choose this if you already own a bottom-metal unit you trust. It is the lightest configuration but puts the fit responsibility on you.
- Hunting Bottom Metal: a flush-fitting hunting profile that keeps the rifle slim and snag-free in a pack or scabbard. The CRBN Veil Tac Grey edition ships with Hunter Bottom Metal in the box.
- Precision Bottom Metal: detachable-magazine capacity for range work. It adds weight and a protrusion that can catch on gear, so decide whether your mountain hunt actually needs it.
Confirm the footprint against your existing unit before ordering No Bottom Metal.
Step 4: Check forend and buttstock options if you shoot supported
The HNT26 offers a Standard forend and an ARCA forend; the ARCA option matters if you shoot off a tripod. Buttstocks split into folding and non-folding; folding packs smaller and travels better, at the cost of one more mechanism to maintain and check in the field.
Step 5: Confirm whether the stock needs bedding
This is the step most buyers skip, and it changes the true cost of the stock.
- GRS Hunter Light: GRS recommends glass bedding. That is an extra step and an extra cost if you do not bed actions yourself, and it means the stock is not a true drop-in.
- GRS Fenris: GRS explicitly does not recommend glass bedding, which makes it the self-fit option in this lineup.
- MDT CRBN and HNT26: chassis designs with V-block bedding, such as the Veil Tac Grey edition, secure the action without epoxy, but you should still confirm action-screw torque after a rough trip.
Step 6: Measure length of pull and plan spacers
Measure your current length of pull before ordering spacers, because the systems differ. The GRS Hunter Light starts at 32.5 cm and extends to 34.5 cm using the two installed spacers, with up to two more sold separately to reach 36.5 cm. The GRS Fenris adjusts from 33.5 cm to 36.3 cm. Ordering without planning the spacer stack is how hunters end up with a rifle that fits on the range and not in a steep alpine stance.
Step 7: Verify caliber ceiling and barrel contour
Both GRS stocks list a maximum caliber of .375 H&H. If you are building a magnum beyond that ceiling, the GRS options are out.
Watch out: a stock listed as compatible with your action can still require inletting for your specific barrel contour or bottom metal. Confirm all three, action, bottom metal, and barrel contour, before you order, or budget for a gunsmith.
Quick compatibility summary
For Remington 700 and Tikka owners, the CRBN is the cleanest fit because MDT lists both platforms directly; the HNT26 is the choice if you also run Savage or Howa actions or want ARCA and folding options. The Hunter Blaze edition is the finish-specific Tikka T3x option, and the Veil Tac Grey edition is the Remington 700 Short Action limited edition with V-block bedding and Hunter Bottom Metal included.
Frequently Asked Questions
What is the lightest rifle stock for mountain hunting?
In this selection, the GRS Hunter Light is the lightest at 1.05 kg (plus or minus 5% depending on the weapon inlet). It is also the shortest and slimmest stock GRS offers, with a 32.5 cm length of pull that extends to 34.5 cm using the two installed spacers. The MDT CRBN and HNT26 chassis use carbon fiber and magnesium construction to keep weight down while adding rigidity, so the right lightweight rifle stock depends on whether you prioritize minimum grams or a stiffer, more adjustable platform.
Are carbon fiber rifle stocks worth the extra cost for hunting?
Carbon fiber buys you stiffness at low weight. The MDT CRBN is foam-filled carbon fiber and the HNT26 pairs a magnesium alloy base with carbon fiber components, which keeps the platform rigid without the mass of a traditional tactical system. For mountain hunters covering long distances, that combination of low weight and a stable action bed matters more than on a range rifle. Whether it is worth the price depends on how many miles you carry the rifle and how much you value a stiff forend for follow-up shots.
Which lightweight rifle stocks for Remington 700 actions are available here?
The MDT CRBN fits the Remington 700 Short Action and Long Action CIP 3.850 inch, and the HNT26 covers Remington 700 short and long actions. The limited edition CRBN in Veil Tac Grey is built for the Remington 700 Short Action and ships with Hunter Bottom metal in the box. Check the inlet before ordering, because the CRBN is listed as right-handed only and bottom metal is chosen separately on the standard model.
Are synthetic rifle stocks better than wood for mountain hunting?
A synthetic or composite stock will not swell or shift with moisture the way wood can, which matters when you cross rain, snow and temperature swings in the same day. The GRS Fenris is a drop-in synthetic stock with adjustable length of pull from 33.5 cm to 36.3 cm and an adjustable cheekpiece, so it fits without bedding work. Wood remains a valid choice, but for wet alpine conditions a composite stock removes one variable from your rifle's zero.


